View this page of the catalog
These kits are basic four point roll cage kits representing good sound safety at an affordable price.
Each kit comes with everything already bent and notched. Every one of our kits is built to fit the specific year and body style you are building. Our door bars are curved and most have different depths from top to bottom to fit out to the door skins. The 4 point cock pit section of the cages are different widths depending upon the size (mini stock, mid size, full size) and come with a variety of
door bar set ups to suit your needs. Each kit includes gussets, door bar spacers & roof hoop gussets.
All of our cages come with our full instruction booklet, written in plain English, so you don't waste any time!
Most things that you order with a Roll Cage Kit will not increase your shipping charges.
Kit #4 includes the brace and seat belt bar in the main hoop, in addition to front rails that run forward of the firewall.
Bracing for these rails are cut and notched to fit. Our cages are made of 1 3/4" x 0.095 wall ERW tubing.
Most cages are available in 1 1/2" x .095 wall ERW tubing for an extra $35.00 charge - please check the 1 1/2" box after you enter your body style below.
(All cages can be quoted in DOM seamlesss tubing - you need to speak with a sales rep for this.)
|
Featured above Part #201-5 $385.
Part #501-5 $409.
also includes a diagonal brace in the main hoop and a seat belt brace
|
Featured above Part #201-6 $385.
Part #501-6 $409.
also includes a diagonal brace in the main hoop and a seat belt brace
Featured above Part #201-7 $504.
Part #501-7 $532.
also includes a diagonal brace in the main hoop and a seat belt brace
|
Featured above Part #201-8 $504.
Part #501-8 $532.
also includes a diagonal brace in the main hoop and a seat belt brace
View this page of the catalog
We have expanded our range of kits to fit just about every racer's needs! These kits have evolved from our old ECONO
line of cages and provide protection on driver's side only or on both the driver and passenger side. Each of these cage kits
goes forward of the firewall, around the radiator in a continuous hoop, offering maximum protection in an economy cage.
Each cage comes with bracing to the rear and a front and rear dash bar.
In kits -5 & -6 only driver side door bars are supplied. Our door bars are curved and most have different depths from top to bottom to fit out to the door skins. We provide one straight door bar to brace from front to rear on the passenger side in the -5 & -6.
If you prefer your braces for the front hoop all cut and notched to fit, order kit -5 or Kit -7. If you prefer to cut your own bracing and triangulation,
then order Kit -6 or Kit -8 and we'll supply 24 feet of extra tubing (4 x 6ft. pieces) instead of the front hoop braces. 25 gussets are supplied for each door bar grid. The 501 series includes an additional main hoop brace and a brace for mounting your shoulder harnesses.
Every 201 and 501 kit includes 2 heavy duty roof hoop gussets and a full, easy to follow instruction booklet.
|
Part #201-9 $693.
Kit #9 is a deluxe kit which includes all pieces from the main hoop forward, all cut notched and bent to fit the specific year and body style that you are
building. Our door bars are curved and most have different depths from top to bottom to fit out to the door skins. All pieces are constructed of 1 3/4" x 0.095 ERW tubing and every piece is labeled and comes with a parts list and a full instruction
book. 50 door bar gussets are supplied for the door bar grids as well as 2 heavy duty roof hoop gussets. All cages can be quoted in DOM seamlesss tubing - you need to speak with a sales rep for this.
Every price is quoted in US funds. Anything that you order with a Roll Cage Kit increases your freight charges only slightly.
|
Part #SP-8K $973.
View this page of the catalog
Part #SP-8-K is the kit version of the Chevy Stocker Chassis. This is exactly the same kit that our fabricators use to build the fine fully welded chassis that we produce from our jigs. It uses 1 3/4" x .095 wall ERW tubing throughout. It includes everything you see above and is complete from front to back with all the pieces cut and notched to fit the body style you are using. All you have to add is the frame. It includes all gussets, spacers, roof hoop gussets and an instruction
book written in plain English. This superior kit comes with every piece labeled for easy identification.
If you are building a Camaro you can add our sub frame kit at a reduced price when purchasing this cage.
You can have an interior sheet metal kit, seat mount or brake & suspension parts added to the order and your freight charges will increase only slightly.
Remember that we keep in stock a full line of parts that can be shipped with your cage kit to save on freight. Ask your sales rep about any items you need in addition to the cage. We carry everything you'll need to build a roller, minus the driveline.
(All cages can be quoted in DOM seamlesss tubing - you need to speak with a sales rep for this.)
|
|
SEAT MOUNT KIT
 This seat mount kit, when ordered with any one of our cage kits or chassis, will save you hours of time and will not increase your freight charges. As Stock Car Racing Magazine said "it's economical enough that you should just order it along with the cage kit." It will give you the safest mounted seat you could possibly have.
Simply rotate the three mounting tubes in the slip tubes provided
to lineup with the main hoop and the door bars. All of the tabs are included to also mount your seat belts.
If this kit is ordered alone freight charges are a minimum of $25.
ST-MOUNT $77.
|
UNIVERSAL SUB FRAME KIT
Part #SP-1FR UNI BODY
$182.00
This Universal Sub Frame Kit is designed with both safety and performance
in mind. This kit can be used with any unibody car but is designed for the Camaro/Firebird/Nova/Ventura. It ties the front and rear
frame sections together, providing much needed strength and rigidity to your
unibody chassis. Once installed, the kit also provides solid mounting positions
for our roll cage kit.
|
|
COCKPIT INTERIOR SHEET METAL KIT
Part #TK-50
$273.00
This interior sheet metal kit is the Cockpit section only. It is constructed of sturdy 20 guage sheet metal, broke and bead rolled to give a professional appearance to any race car carrying a CSC cage kit.
If you order it for shipment with your cage kit it will only increase your freight charges slightly. If it ships by UPS alone freight charges are a minimum of $72.00. This kit is available for a car or a truck. Please specify body style when ordering.
|
ADDITIONAL TUBING
Additional tubing for any extra bracing or triangulation you want to do is available in ten foot lengths for $29.00
Ten foot lengths of 1 1/2" x .095 wall tubing at $25.00 each.
5 PIECES OF ROLL BAR PADDING FOR $25.00
If you purchase any roll cage kit for delivery to a US business address, you may order a box of roll bar padding in red, blue, or black for only $25.00 .
Each box contains 5 three foot long pieces.
3 INCH SFI 6 POINT BELTS
$135.00
|
3 INCH SFI 5 POINT BELTS
$125.00
|
We have gone to great extremes in providing the best quality belts and harnesses. All webbing and hardware meet and exceed current Mil/Spec standards and or their commercial equivalent. In addition these belts and harnesses are SFI 16.1 approved and are date labeled currently for tech inspection.
Belts are available in red, blue or black and come in a 6 point (LF-70053) configuration or a 5 point (LF-70052).
For exact freight charges
to your location please call 1-866-954-0522.
If you are ready to order online click here:
TIME TO ORDER IN THE USA
TIME TO ORDER IN CANADA
If you have any questions about this cage kit page please feel free to ask:
Your Name:
We answer by e-mail so please provide
your e-mail address:
Type your question here:
If you don't hear from us in two business days please e-mail us again - we respond quickly so if we haven't answered it's because we didn't get it.
back to the top of page
VIEW LETTERS FROM OUR CUSTOMERS
E-Mail Us
OUR CAGE KIT INSTRUCTION BOOK
| | |
| | | |