Bell Helmets instock and available for immediate shipping

1-888-489-3880

HOME PAGE

SAFETY EQUIPMENT

Ribbon Window Nets
$37.50
RJS-50525

Ribbon Window Nets are made of heavy duty 1" webbing with openings at top and bottom for mounting rods. All nets are SFI SPEC 27.1
Mounting Kit for this window net includes all rods and tabs and seat belt buckle release - RJS90906 $44.50.

Mesh Window Nets
$42.50
RJS-50525M

Mesh Window Nets are made out of a rugged nylon mesh that offers excellent strength and visibility. All nets are SFI SPEC 27.1
Mounting Kit for this window net includes all rods and tabs and seat belt buckle release - RJS90906 $44.50.

SAFETY HARNESSES
Our domestic SFI 16.1 approved safety harnesses are manufactured by Leaf Racewear. They have gone to great extremes to provide the best quality belts and harnesses. All webbing and hardware meet and exceed current Mil/Spec standards and or their commercial equivalent. In addition these belts and harnesses are SFI 16.1 approved and are date labeled for Tech inspection. All webbing is 3" and the anti-sub belts are 2".

Latch Type Belt Systems Bolt In
LF-70053 six point $135.
LF-70052 five point $125.

Camlock Belt Systems Bolt In
LF-75053 six point bolt in $275.
LF-77053 six point snap in $289.
snap in eyebolts $12. extra each

CG-Lock ®

$50.95

The CG-Lock gives you about 80% of the holding power of a full race harness. Why do people use a harness?

You don't need to "hang on" when driving hard...you can keep your feet light on the pedals and your hands light on the wheel for better driving control, faster reactions, and less fatigue.

You are "one with the vehicle"...you can sense the vehicle movement better, react sooner, and "feel" your way through the tricky spots more easily.

Your safety is increased. Unfortunately, most of us do our track driving in our daily drivers with standard three-point automotive seat belts, not racing harnesses.

Once the CG-Lock is installed, you pull up on the shoulder harness of your seatbelt, and the lap belt portion gets "racing harness tight" and stays as tight as you want until you release it!

Simple, But what a difference it makes.
ORDER IT NOW

VP 5 Gallon Utility Fuel Jug

$38.50

The square jug available in red, white or blue is ergonomically designed for easy handling and pouring. Its fixed panels are not subject to swelling, maintaining a consistent unit of measure. The jug caps are multipurpose in that they can be adapted to work with a hose (sold separately $14.50) and also are nonbreakable, made with impact modified resin. Both the jug and vent caps are designed with rubber gaskets to prevent leaking.

ROAD RACING CAGES & ROLL BARS

GOTO MIATA PAGE
CSC Racing Products has been manufacturing and installing Road Racing Cages for ASN-FIA, CASC, SCCA and CARS sanctioned events for many years. We can prep any vehicle for a roll cage or roll bar. Some we require the vehicle for the installation, others we build from existing jigs. The Miata happens to be an item we build from jig regularly as a roll bar or a full cage.

FIRE EXTINGUISHERS MFM-400-S $525.00 Regular 4 litre Water Based system - fully refillable AFFF - Pull Cable - supports 6 nozzles - comes complete with everything you need to install this system Bottle size is 15" to end of head and 6" diameter. Race and Rally Car Fire Extinguisher MFM400-S 4.0 Litre Steel Mechanical Race and Rally Car Fire Extinguisher These systems are widely used in formulas that comply with national status regulations only and offer the competitor the same high level of protection. We have now refined this type of system so that it can be used on either single seater or saloon/rally 2.5 ABC Hand Held ABC Extinguisher $75.00 . Hand held ABC extinguisher, 2.5 lb. with metal bracket.
IO PORT VIDEO CAMERA MOUNT $135.00 This innovative Video Camera Mount quickly won nation-wide acclaim. Use this mount to improve driving skill and strategy, time sections of track, view your race with family and friends, and document rule infractions. This sturdy mount features a special polyurethane bushing to help eliminate the high-frequency vibrations found in the race environment. Offered in size 1¼" to 2", the unit clamps directly to the harness bar, roll bar or cage. It has complete 3-axis adjustment that allows you to aim the camera precisely, regardless of position on the roll cage. Our mount comes with instructions, tips on achieving a good video, and a 1" wide Security Strap for added safety and to further dampen vibrations. The mount, installed with the security strap according to instructions, has met the approval of most sanctioning bodies for wheel-to-wheel racing. ORDER IT NOW
IO PORT SMALL HEAD CAMERA MOUNT $75.00 I/O Port has developed this mount for use with Small and Remote Head Video Cameras (Lipstick cameras) such as the ContourHD and ChaseCam. There is no vibration damping in this mount. This unit will clamp to tubing from 1¼" to 2" in diameter. It has complete 3-axis adjustment allowing for precise camera aiming. All mounting hardware is provided. Included: Mount with 1/4" x 20 mounting stud Backing clamp 4x bolts, 8x washers, 4x nuts Screw and hex wrench for a more permanent installation (This screw replaces the thumb screw to save weight and reduce drag on open cars.) In some positions, the knob conflicts with the mount bolt heads. In this case, use the supplied screw with hex wrench to replace the knob. ORDER IT NOW
ROBIC SC-808 $90.00 Powerful and precise - analyzes performance in several ways with a comprehensive array of advanced timing functions. Features: EL backlight illuminates entire display 200 dual split memory recall 1/100 second precision to 25 hours User selectable running lap or split time Automatic lap counter to 999 Fastest, slowest and average lap times Speed timer in MPH/KPH 200 memory recall of lap speed, time and number Distance input precise to 1/1000 mi/km Fastest, slowest & average lap speed & times Dual countdown timers can operate independently or simultaneously Time of day, alarm, calendar Stroke rate calculator for swimming and rowing Shows current running lap or split time One year warranty 3 year battery life
SABELT RACER DUO Tubular Frame Totally fabric covered tubular steel frame removable standard leg cushion 5 harness slots both side and bottom mount HANS® compatible FIA approved black Z101040 $330. SLIDING RAILS universal sliding rail runner guide frame Z200002 $135.00 STEEL FIXED MOUNTS steel brackets for side mounting 3 mm thickness FIA compliant standard length black epoxy painted Z200004 $70.00 a pair
OVAL TRACK SEAT MOUNT KIT $77.00 This little kit, when ordered with any one of our cage kits or chassis, will save you hours of time. It will also give you the safest mounted seat you could possibly have. By simply rotating the tubes in the slip tubes provided (not shown), you mount this kit directly to the main hoop and the door bars. All of the tabs are included to also mount your seat belts! ORDER IT NOW
ALUMINUM OVAL TRACK SEATS Part #'s KRK-09200 (14 1/2" 20° Layback Double Rib)$230. KRK-19200 (14 1/2" 10° Straight Up Double Rib)$230. KRK-09400 (15 1/2" 20° Layback Double Rib)$230. KRK-19400 (15 1/2" 10° Straight Up Double Rib)$230. KRK-09800 (17 1/2" 20° Layback Double Rib)$230. KRK-19800 (17 1/2" 10° Straight Up Double Rib)$230. KRK-20900 (21" 20° Layback Single Rib) $360. Our aluminum oval track racing seats are fabricated for us by KIRKEY Fabrication, one of North America's largest and most respected seat manufacturers. They are constructed of 0.125" high grade aluminum. Double rib support is offered in the straight up regular size and single rib support in the lay back regular size and both lay back and straight up large sizes. Sizing is measured in inches across the seat. Small is 14 1/2", Regular is 15 1/2" and Large is 17 1/2". The straight up is a 10° lay back. The lay back is a 20° lay back. All seats include a rugged black vinyl/nylon cover that secures snuggly.
ALUMINUM INTERMEDIATE ROAD RACING SEAT #47000 This seat is designed for entry level road course cars. It has all the comforts of the Kirkey deluxe seat at an affordable price. The seat is very comfortable making it ideal for endurance events. Features: .125 Thick 5052 grade aluminum , TIG welded outside and MIG welded inside for added strength A true road race design with built in shoulder supports Aluminum Extrusion around perimeter and belt holes for extra strength Available in widths. 15", 16", $530.00 17", 18", $560.00 Entire seat is padded with high-density foam for extra comfort and support Contoured headrest is designed to cup helmet Support at rib height for high G force cornering but is designed to not interfere with shifting Cover is made from a high quality tweed Available in your choice of red, black, blue or grey cloth
KIRKEY 18° LAYBACK CONTAINMENT SEAT #68000 $850. Seats may take up to 3 weeks for delivery This Layback Containment seat is designed for the racer who wants the added safety of a containment seat at a price they can afford. Designed using the same bottom that our Lightweight Layback seat has for years assures this seat will fit in your car with ease. Constructed from TIG welded .100" thick 5052 grade aluminum. MIG welded inside for added strength. Unique design adds extra strength and keeps weight down. Designed to accommodate all head and neck restraints. Built in reinforced padded shoulder restraints. Reinforced vertically adjustable padded head restraint. Aluminum extrusion offset on perimeter of seat adds strength and keeps inside of seat smooth. Padded rib protectors for extra driver support. Contoured elongated bottom with extended leg supports and center leg separator. Accomodates six point seat belts. Easy to install cover. 18 degree layback Designed to replace your existing intermediate or lightweight seat. Head restraint designed for easy entry and exit.
ALUMINUM ROAD RACE CONTAINMENT SEAT #45000 $960. Constructed from TIG welded .100" thick 5052 grade aluminum. MIG welded inside for added strength reinforced rib and shoulder restraints have high density padding for extra protection and comfort designed to accommodate all head and neck restraints reinforced rib and shoulder restraints have high density padding for extra protection and comfort vertically adjustable head restraint uses high density energy absorbing padding shoulder and head restraint symmetrically designed for unobstructed peripheral vision and comfort designed to accommodate 6 point seat belts bottom contoured for thigh support and drive shaft tunnel clearance padded full deluxe cover with 1/2" high density impact padding available in red, blue or black $960. bottom and back seat mounts available
DELUXE ALUMINUM ROAD RACING SEAT $1050.00 #43000 Finally...a Road Race seat designed for maximum support, comfortable enough for daily driving and made of aluminum. This European-styled Aluminum Road Race Seat is manufactured by Kirkey Racing Products to their highest standards. Shoulder supports, leg bolsters and five-point harness openings combine to make this a great seat for multiple-driver cars. Tall shoulder harness openings allow for drivers of different heights. Features pre-drilled mounting points. The contoured black cloth cover offers just the right amount of padding for safety without sacrificing road feel. The velour cover is easily removed for cleaning. Available in 15", 16", 17", 18", widths. Available in Black, Grey, Dark Blue or Burgundy Velour
ADJUSTABLE SLIDE RAIL SEAT MOUNT $110.00 This slide rail seat adjuster is a double locking steel type which is the most secure available.