The following are photos taken of a full tube chassis construction designed around
the popular early Camaro front geometry. It will accept rebuilt OEM Camaro lower
control arms and conventional steering components. It can also be configured
to accept rack and pinion steering. Tubular lower control arms are available to mount
in existing brackets. These can be conventional coil or coil over application.
This chassis has been developed to replace the Camaro clips which have become
difficult to obtain. The lower A-arms, steering box and idler arm mounts are located
exactly as they were positioned on an OEM Camaro front frame section.
The base price
on the chassis described above is $3424.00
A Rolling Chassis as shown in the photos below, minus the body, minus the rubber; No Brakes; including 22 Gallon Budget Cell in Steel Case; AFCO Springs; Pro Shocks; Diamond Rims; Wilwood Pedal Assemblies; Coleman Spindles; would list at $23,460.00
freight is always extra
Full View from the front
Full View from the driver's side
Cockpit area viewed from passenger side
Fuel Cell area and rear suspension
Front suspension - driver side
Front suspension - passenger side
Front of car from the passenger side
Front suspension
